Safekipedia

Halteres

Adapted from Wikipedia · Adventurer experience

A close-up of a Tipula fly showing its halteres, small structures on its wings used for balance during flight.

Halteres are special, small, club-shaped organs on some flying insects. They help these insects know how their bodies are moving while flying. You can find halteres mainly in two groups of insects: the Diptera, which includes flies and mosquitoes, and the Strepsiptera, a smaller group of insects.

8= single pair of wings and 9= halteres

In flies, halteres grew from what were once their hindwings. In strepsipterans, they grew from the forewings. When the insect flies, these halteres shake fast along with the wings. They work like tiny gyroscopes, feeling movements caused by the Coriolis effect. Special sensors at the base of the halteres notice these movements. This helps the insect adjust its position and keep its head steady while flying. This system gives the insect quick feedback to control its wings and stay balanced in the air.

Background

Most insects have two pairs of wings, but flies have only one pair of wings for flying and a special pair called halteres. The name "Diptera" for flies means "two wings". There is another group of insects called strepsipterans, or stylops, that also fly with just two wings and two halteres. In strepsipterans, the front wings changed into halteres, while in flies, the back wings changed into halteres.

Halteres help flies stay balanced while flying. They move up and down with the wings, but when the fly turns, the halteres move in curves. This movement helps the fly feel when it is turning. Special tiny structures at the base of the halteres bend, and the fly's nervous system uses this to adjust its flight. Halteres might also help control the fly's head and could help when the fly is walking, but this is not fully understood.

History

Halteres were first found and described by William Derham in 1714. He noticed that flies could not stay in the air if their halteres were taken away, but they acted normally otherwise. At first, people thought halteres helped flies keep their balance.

In 1917, a scientist named v. Buddenbrock said that halteres might work like an on/off switch for flight. But later, it was found that this was not true. The idea that halteres help with balance is correct.

v. Buddenbrock also showed that right after removing the halteres, flies could not move their wings normally. But if the flies were given a few minutes to rest, they could fly normally again. In an experiment by Pringle in 1938, attaching a thread to the flies helped them fly more steadily. This supported the idea that halteres help sense body movements.

Pringle originally thought halteres only helped detect one type of movement, but later studies showed they can detect all three types of rotation. Flies can sense these movements by comparing signals from both sides of their bodies and from special sensors at the base of each haltere.

Evolution

Scientists think halteres came from the wings of insects. In flying insects called Diptera, halteres grew from the back pair of wings. In another group called Strepsiptera, halteres grew from the front pair of wings. Halteres move and look like they turned into wings. Special sensors at the base of halteres work like those in normal wings.

Strepsipteran halteres: teardrop-shaped structures located between the fore and mid legs (indicated by red arrows)

Halteres have evolved separately in two groups of insects: Diptera and Strepsiptera. Some scale insects have similar structures on their wings. In butterflies and moths, the antennae help with balance during flight, working in a different way from halteres but still helping for steady flying.

Genetics

In insects, special genes called Hox genes help decide how their bodies grow. These genes control parts like legs or wings. One gene, called Ultrabithorax (Ubx), helps decide what the back part of an insect’s body looks like. In flies, this gene helps create halteres, the tiny balance organs they use while flying. If we turn off this gene, the halteres can change into full wings.

Scientists have found that Ubx also affects other genes. Some of these genes help make wings but are turned off in halteres. This gives clues about how halteres might have evolved from wings long ago.

Dynamics

Dipteran insects and other insects have special muscles called indirect flight muscles that help them fly. These muscles are attached to the insect's body, not the wings. When the muscles contract, they change the insect's body shape, which moves the wings up and down.

The wings and halteres move together, even without brain signals. Special parts of the insect's body called subepimeral ridges connect the wings to the halteres.

Fly thorax showing side view of dorsal longitudinal (DLM; upper left) and dorso-ventral (DVM; upper right) power flight muscles. Bottom image shows transverse cross section of fly.

The left and right sides of the insect's body must work together. Flies turn by changing how much each wing moves. This is helped by a structure like a gearbox, which changes how fast and how much the wings move. When one wing moves less than the other, the fly turns in that direction. Even though halteres have their own muscles, changes in wing movement also affect haltere movement.

Halteres can move when a fly is walking, not just flying. Because haltere muscles are tiny, their movement is hard to notice during flight. The way left and right halteres move can change more when walking than when flying.

Differences between species

Halteres always move with the wings, but the timing can differ between species. Flies with short antennas move their halteres almost exactly opposite to their wings. More ancient flies, like crane flies and mosquitoes, have different timing between wing and haltere movements. This suggests that the ways these insects process these movements in their nervous systems may also differ.

Morphology

Halteres are small, club-shaped organs on some flying insects. They help insects know how their bodies move while flying. In crane flies, the halteres have long stalks and are easy to see. In blow flies, small flaps cover the halteres.

Flies hold their halteres at a special angle to feel movements in three directions. This helps them stay balanced while flying. Special sensors at the base of the halteres send messages to the insect's brain about these movements.

Electron micrograph of fly haltere and surrounding structures:1 calyptra (squama) 2 upper calypter (antisquama) 3 haltere 4 mesopleuron 5 hypopleuron 6 coxa 7 wing 8 abdominal segment 9 mesonotum c capitellum of haltere p pedicel of haltere s scabellum of haltere

Neurophysiology

When halteres move, they send signals through a special nerve. These signals help the insect know when its body position changes. The signals go to a part of the insect's brain that controls flying.

The haltere nerve

Sensors at the base of the haltere send information through one nerve. These sensors help the insect understand movements.

Muscles

Flies use the same muscles for moving their wings and halteres. These muscles help control the movements of the halteres.

Campaniform sensilla

Special sensors at the base of the haltere feel when the haltere moves. These sensors send messages to the insect's brain.

Chordotonal organs

Another type of sensor also helps the haltere send messages about movements to the brain. There are fewer of these sensors than the other type.

Main article: Campaniform sensilla

Role in visual processing

Insects like flies have eyes that cannot move on their own. To keep their view steady while flying, they need to move their whole head. Halteres help the fly know how its body is moving, which also helps control the head's position.

When a fly is flying and its body turns, the halteres help keep the head pointing at what the fly is looking at. This works best when the body turns quickly. If the halteres are removed, the fly cannot sense fast turns as well. Even without halteres, flies can still adjust their head using their eyes, but this works more slowly and for slower movements. So, both the halteres and the eyes work together to keep the fly's view stable — halteres for quick changes and eyes for slower ones.

Flies use both their eyes and halteres to sense movement. Their eyes work best at slower speeds, while halteres are better at detecting fast turns. This combination lets the fly sense movements in all directions.

Non-flying haltere activity

Scientists have studied how halteres, small organs on some flying insects, work when the insects walk. Some types of flies, like those in the families Muscidae, Anthomyiidae, Calliphoridae, Sarcophagidae, Tachinidae, and Micropezidae, move their halteres while walking, just like when they fly. These halteres move in a similar way during both activities. But other types of flies only move their halteres when flying.

For example, flesh flies move their halteres while walking and do worse at certain walking tasks when their halteres are removed. On the other hand, fruit flies [/w/6] do not move their halteres while walking and show no change in ability when their halteres are removed. This shows that halteres help certain flies walk better.

Some flies, including common house flies and blow flies, use their halteres when they start to fly. These flies can take off much faster—about five times faster—than flies that do not use their halteres to take off. Without halteres, these flies take longer to get into the air and are less stable during takeoff. Flies that do not use their halteres for takeoff are not affected in the same way.

Images

Animation showing how an insect's wing moves during flight using an indirect flight mechanism.

Related articles

This article is a child-friendly adaptation of the Wikipedia article on Halteres, available under CC BY-SA 4.0.

Images from Wikimedia Commons. Tap any image to view credits and license.