Inch of mercury
Inch of mercury (inHg, ″Hg, or in) is a unit for measuring pressure. It is not part of the SI system, which is the main international system of units used around the world. It is used for barometric pressure in weather reports, in refrigeration, and in aviation in the United States.
The unit gets its name from mercury, a shiny liquid metal. One inch of mercury is the pressure made by a column of mercury that is 1 inch (25.4 mm) tall. This is measured under the standard acceleration of gravity. Mercury changes its density when the temperature changes, so the number used to convert to metric units also changes. In older books, the unit is based on mercury at 60 °F (15.6 °C). At that temperature, one inch of mercury equals about 3,376.85 pascals.
In Imperial units, one inch of mercury at 60 °F is about 0.489771 psi. A related unit is the inch of water, which measures pressure in a similar way but uses water instead of mercury.
| Conditions | Pressure |
|---|---|
| conventional | 3386.389 pascals |
| 32 °F (0 °C) | 3386.38 pascals |
| 60 °F (16 °C) | 3376.85 pascals |
Applications
Airplane altimeters measure height by comparing the air pressure at altitude with a set reading from the ground. In North America and Japan, these readings are given in inches of mercury. Most other countries use hectopascals. Ground readings change with the weather and along the flight route, so air traffic control gives updated readings from time to time. Planes flying at or above the transition altitude, which is different in each country, set their altimeters to a standard pressure of 29.92 inHg or 1013.25 hPa (1 hPa = 1 mbar). This is true no matter the actual sea level pressure. These readings are called flight levels. Piston engine aircraft with constant-speed propellers also use inches of mercury to measure manifold pressure. This shows how much power an engine with a turbosupercharger is making. In car racing, such as United States Auto Club and Champ Car Indy car racing, inches of mercury measured the pressure at the turbocharger inlet. Today, it is still used in car tuning. It measures vacuum or pressure in the engine's intake manifold, and it is shown on boost or vacuum gauges.
In air conditioning and refrigeration, inHg is often used to describe "inches of mercury vacuum." This means pressure below the surrounding air pressure. It helps with removing refrigerants, checking systems for leaks, and drying out refrigeration systems. Car cooling system tools also use it. Workers use these tools to remove air, check whether the system can hold a vacuum, and refill it with coolant. Typical minimum vacuum values are between 22 and 27 inHg. In the past, inches of mercury was the usual unit for measuring pressure in railway vacuum brakes.

Quiz time!
4 questions about Inch of mercury
What does an inch of mercury measure?
Keep exploring
This article is a child-friendly adaptation of the Wikipedia article on Inch of mercury, available under CC BY-SA 4.0.
Images from Wikimedia Commons. Tap any image to view credits and license.