Pratt & Whitney PW1000G
The Pratt & Whitney PW1000G family, also sold as the Pratt & Whitney GTF (geared turbofan), is a group of high-bypass geared turbofan engines made by Pratt & Whitney. Its models can produce 15,000 to 33,000 pounds-force (67 to 147 kilonewtons) of thrust. As of 2025, they are used on the Airbus A220, Airbus A320neo family, and Embraer E-Jet E2. They were also used on new Yakovlev MC-21s, but exports to Russia were stopped because of international sanctions during the invasion of Ukraine.
After years of development and testing on different demonstrator engines, the program officially started in 2008 with the PW1200G, which was meant for the Mitsubishi SpaceJet, a project that was later canceled. The first successful flight test took place later that year. The PW1500G, designed for the A220, became the first certified engine in 2013. P&W is estimated to have spent $10 billion developing the engine family. The type certificate for the PW1100G is held by International Aero Engines, while Pratt & Whitney holds the certificates for the other versions.
Most jet engines have a single shaft, so all the parts turn at the same speed. The PW1000G is different. It has a gearbox between the fan and the low-pressure core. This lets each part run at its best speed. Pratt & Whitney says this allows the PW1000G to use 16% less fuel and make 75% less noise than engines of the previous generation.
Airlines first became interested in the engine family because it saves fuel. However, technical problems have hurt its reputation in the market. For example, early problems with the PW1100G, which powers the A320neo family, kept some aircraft on the ground and caused engines to fail during flight. Some engines were built with powdered metal that was not clean, which required repairs lasting 250 to 300 days. Some airlines chose the CFM LEAP engine instead.
Development
Pratt & Whitney began testing its new engine ideas in the late 1980s and 1990s. It worked with NASA Glenn and NASA Ames wind tunnels. Around 1998, the company first tried to build a geared turbofan engine. This was the PW8000, an upgrade of the PW6000. The PW8000 project was later stopped, but it led to the Geared Turbofan (GTF) program. German company MTU Aero Engines helped develop it. By 2006, Pratt & Whitney was spending a lot of money on the GTF for the next generation of single-aisle airliners. In July 2008, the GTF was renamed the PW1000G.
The engine first flew in 2008 on a Pratt & Whitney Boeing 747SP test plane. The Mitsubishi Regional Jet was one of the first planes chosen to use it. Engines for the Airbus A320neo and the Embraer E2 were approved and flown in the following years. Production started in 2016. Early problems with engine starts and fan blades slowed deliveries, so many customers chose the CFM LEAP instead. In 2021, Pratt & Whitney announced an improved version called the GTF Advantage. European aviation authorities approved it in October 2025.
Design
The engines can produce between 15,000 and 34,000 pounds-force (67 to 151 kilonewtons) of thrust. A gearbox sits between the fan and the low-pressure part of the engine. This lets each part spin at its best speed. The fan spins about 4,000 to 5,000 times per minute, and the low-pressure part spins about 12,000 to 15,000 times per minute. The PW1431G has a compression ratio of 42. Because the fan turns more slowly, the tensile stresses on the blades are lower. This means strong aluminum alloys can be used. The A320 PW1100G fan has 20 blades, down from 36 on the CFM56-5B.
Pratt & Whitney says the PW1000G uses 16% less fuel than engines on regional and single-aisle jets. It can also be up to 75% quieter. The design needs a less powerful engine core than the CFM LEAP. This leaves room for further fuel burn savings of 5 to 7% over the next decade. The gearbox is built to last without regular maintenance. The only routine task is changing its oil, which helps lower maintenance costs. The fan drive gear system is expected to fly for 30,000 flight hours or more before its first overhaul.
Operational history
Lufthansa received the first engines of this type on January 20, 2016. They started being used for flights later that month. By January 2018, the engines had flown 500,000 hours on 135 aircraft. At first, the engines had many problems. They took a long time to start. IndiGo and Go Air had to take many engines off their planes early because the hot, humid, salty air damaged them. In 2018, a seal problem caused aviation officials to stop some A320neo planes from flying until they had spare engines. Engine vibrations also meant that Lufthansa had to change engines early on its A320neo planes. Pratt & Whitney changed the design and updated the software to fix these problems.
In 2023, the Indian airline Go First stopped flying and filed for bankruptcy. It said the engines could not be relied on. In July 2023, Pratt & Whitney asked for some engines to be checked because some parts were made with contaminated metal. In September 2023, this check was expanded to all 3,000 engines. Engine failures on Airbus A220 planes in 2019 led the FAA and EASA to issue safety orders. The FAA approved a software update in March 2019. The airline airBaltic also reported an engine failure on an A220-300 in 2020. The engines were later used on other planes, such as the Embraer E195-E2.
Applications
The PW1000G engines power several different airplanes. The Airbus A220 uses only the PW1500G engine. The Airbus A320neo uses the PW1100G, along with the CFM International LEAP-1A. The Embraer E-Jet E2 family uses only the PW1700G and PW1900G engines.
The Mitsubishi SpaceJet was meant to use only the PW1200G, but its project was canceled. The Yakovlev MC-21 used the PW1400G in just six test aircraft. It was later replaced with the Aviadvigatel PD-14 because of sanctions. Before those sanctions, the engine was proposed for the Russian SJ-130. It has also been proposed for the Rekkof Aircraft F-120NG.
Specifications
| Program | PW1100G | PW1400G | PW1500G | PW1900G | PW102XG | PW1700G | PW1200G |
|---|---|---|---|---|---|---|---|
| Fan Diameter | 81 in (206 cm), 20 blades | 73 in (185 cm), 18 blades | 56 in (142 cm), 18 blades | ||||
| Bypass ratio | 12.5:1 | 12:1 | 12.5:1 | 12:1 | 9:1 | ||
| Static Thrust | 24,000–35,000 lbf (110–160 kN) | 28,000–31,000 lbf (120–140 kN) | 19,000–23,300 lbf (85–104 kN) | 17,000–23,000 lbf (76–102 kN) | 24,000 lbf (107 kN) | 15,000–17,000 lbf (67–76 kN) | 15,000 lbf (67 kN) |
| Compressor | Axial flow, 1 geared fan, 3 stage LPC, 8 stage HPC | Axial flow, 1 geared fan, 2 stage LPC, 8 stage HPC | |||||
| Combustor | Talon-X Lean-Burn Combustor | ||||||
| Turbine | Axial flow, 2-stage HP, 3-stage LP | ||||||
| Application | A320neo family | Yakovlev MC-21 | A220 family | E-Jet E2 190/195 | X-66 | E-Jet E2 175 | SpaceJet M90/M100 |
| Service entry | 25 January 2016 | Likely cancelled | 15 July 2016 | 24 April 2018 | – | – | Cancelled |
| Length | 133.9 in (3.401 m) | 125.4 in (3.184 m) | 113.5 in (2.88 m) | ||||
| Fan case diameter | 87.6 in (2,230 mm) | 79 in (2,000 mm) | 62 in (1,600 mm) | ||||
| Weight | 6,300 lb (2,858 kg) | 4,800 lb (2,177 kg) | 3,800 lb (1,724 kg) | ||||
| Takeoff thrust | 30/33G: 33,110 lbf (147.28 kN) 27G: 27,075 lbf (120.43 kN) 24/22G: 24,240 lbf (107.82 kN) | 31,572 lbf (140.39 kN) | 19G: 19,775 lbf (87.96 kN) 21G: 21,970 lbf (97.73 kN) 24/25G: 24,400 lbf (108.54 kN) | 19G: 20,860 lbf / 92.79 kN 21G: 22,550 lbf / 100.31 kN 22/23G: 23,815 lbf / 105.93 kN | 19,190 lbf (85.4 kN) | ||
| Thrust-to-weight ratio | 3.85 – 5.26 | 5.01 | 4.12 – 5.08 | 4.35 – 4.96 | 5.05 | ||
| Max. LP Rotor speed | 10,047 RPM | 10,600 RPM | 12,680 RPM | ||||
| Max. Fan speed | 3,281 RPM | 3,461 RPM | 5,264 RPM | ||||
| Max. HP Rotor speed | 22,300 RPM | 24,470 RPM | 25,160 RPM | ||||

Quiz time!
4 questions about Pratt & Whitney PW1000G
What makes the PW1000G different from most jet engines?
Pictures
Keep exploring
This article is a child-friendly adaptation of the Wikipedia article on Pratt & Whitney PW1000G, available under CC BY-SA 4.0.
Images from Wikimedia Commons. Tap any image to view credits and license.